|
Product DescriptionPE Form ReleaseTM is an environmental liquid form release agent ideal for providing fast and simple release to architectural bondable concrete surfaces. PE Form ReleaseTM effectively prevents bonding of concrete to forms. Unlike traditional form release agents, PE Form Release does not include high concentrates of hydrocarbons, therefore can be used near sensitive environments like, rivers, dams, lakes, streams and water reservoirs.
Use · Releases concrete forms such as alkus, aluminum, fiberglass, plywood, polystyrene forms and formliners. · Cleans and reconditions forms · Prevents concrete build up on equipment Eliminates build up, bugholes, and fines
Benefits
· Environmental · Contains no hydrocarbons · VOC Compliant · Ready to Use · Non Staining · Leaves concrete ready for curing, sealing, and painting. · Reduces Maintenance Costs Pleasantly Scented
Application
Apply PE Form ReleaseTM directly from container by cross spraying uniformly on forms in a thin, but continuous layer. Avoid pin holes and uncoated areas. Prior to coating plywood forms, apply 1 or 2 heavy brush coats to edges to ensure complete water proofing protection. For best results, lightly fog PE Form ReleaseTM using a atomizing spray tip. Coverage
Aluminum, Steel, Plastic and
Medium Density Plywood, Paper Colum forms 1,000 1,250 ft2 / gal.
BB Grade Plywood ... .. 1,000 ft2 / gal.
Rough-sawn lumber, striated plywood 1st use, 2 coats: ... 500 ft2 / gal./coat Subsequent Use .. 1,000 ft2 / gal.
Clean - Up
PE Form ReleaseTM can be cleaned with sprayers and other application equipment using water.
Limitations
· When any material is to be applied over newly formed concrete, follow the application instructions. · Protect from Freezing PE Form ReleaseTM is a newly designed environmental product and has not been tested under section 10.8 CEGS-03300.
Packaging
275 Gal Tote 55 Gal Drum 5 Gal Pail
|
