|
CC-200TM (City White Concrete Curing Compound)
Product DescriptionCC-200TM is a water based pigment liquid-membrane curing compound that is applied to freshly pour concrete surface, preventing rapid water evaporation. When the CC-200TM compound is properly applied, the surface concrete forms an impermeable membrane, holding moisture in the concrete and keeping the freshly poured surface cooler, preventing cracking and crazing. CC-200TM is an environmental product and does not contain any hydrocarbons like resins, solvents, or waxes.
Use CC-200TM is ideal when applying on concrete exterior surfaces such as highways, airports, streets, walkways, concrete slabs & curb paving.
Specifications When tested in accordance to ASTM C309, CC-200TM meets or exceeds water loss specifications of 2% at 24 hrs and 4% at 72 hrs after application, required by city and county specifications in the State of Texas.
Application Apply CC-200TM after the concrete receives its final finishing. Ideal use in Walkways, Curve sides, Home Slabs, City and County Streets. Apply by low pressure sprayer until saturation. Temperatures above 40° F are recommended.
Coverage Approximately 200 ft²/gal (4.91 m²/l) Coat uniformly, leave no gaps. For best results use a sprayer at 40 psi with a flow of ½ gallons per minute.
Technical Data Drying Time: Typically 2 – 3 hrs depending on temperature, humidity and application rate. Avoid traffic during this time. Flash Point: Greater than 200° F Density: 8.7 ppg Weight: 8.7 ppg Color: Milky White
Precautions Do not mix or dilute with other compounds that contain solvents such as mineral spirits, or fluids that might contain petroleum distillates. This product is not recommended to be used in areas where other treatments are to be used including hardeners. Follow instruction of MSDS for Health and Safety Instructions.
Storage CC-200TM should be stored in tightly sealed factory containers. We recommend storage in a horizontal position to avoid moister accumulation. Store it under roof if possible, especially if temperatures are below 40° F.
Packaging |
